OptiFit Complete

Gallons of finished spray based on the 1.0% v/v rate from a 2 × 2.5 gallon case. At 2.5% v/v, one case treats 200 gallons of spray solution.

Four jugs on the shelf, or one.

OptiFit Complete puts spray-grade liquid ammonium sulfate, modified vegetable oil, non-ionic surfactant and drift reduction into a single adjuvant. It is built for glyphosate, glufosinate and the other herbicides that want a heavy AMS load — and it delivers that AMS pre-dissolved, which is the practical difference between this and a bag of dry.

Dry AMS has to go into solution before it does anything, and what does not dissolve ends up in the screen. Pre-dissolved liquid means less nozzle plugging and less sediment, and the water conditioning happens the moment it hits the tank.

What’s working for you

Ammonium sulfate conditions the water, tying up the calcium, magnesium and iron that would otherwise bind your herbicide and take it out of play before it reaches the weed. The nitrogen in AMS also acts as an activator, increasing chemical absorption within the target pest.

Modified vegetable oil carries the chemical deeper into the canopy, improving deposition and penetration for a more uniform kill — the weeds under the canopy, not just the ones on top.

Non-ionic surfactant increases droplet spreading and leaf coverage, so more of what lands stays where it landed.

Drift reduction creates an ideal droplet size and spray pattern — better coverage on your acre and less of your chemical on someone else’s.

Why growers choose it

• Four functions, one jug — AMS, MSO, non-ionic surfactant and drift control in a single product
• Pre-dissolved liquid AMS — reduced nozzle plugging and sediment versus dry
• Built for high AMS load — designed for glyphosate, glufosinate and similar herbicides
• Deeper canopy penetration — modified vegetable oil improves deposition for a more uniform kill
• Better coverage, less drift — increases droplet spreading while creating an ideal droplet size
• Safe in-crop — nonphytotoxic formula
• APE and NPE free — all ingredients exempt from tolerance requirements under 40 CFR 180.1001(d)
• Wide compatibility — herbicides including desiccants, plus insecticides and fungicides

Coverage

Sold in 2 × 2.5 gallon jugs (5 gallons per case) or 250-gallon totes — $26.80 per gallon at case pricing.

At 1.0% v/v, one case treats 500 gallons of finished spray solution. At 2.5% v/v, one case treats 200 gallons.

How to apply

Use rate: 1.0% v/v (1 gallon per 100 gallons of spray solution) to 2.5% v/v (2.5 gallons per 100 gallons of spray solution). Do not use at rates above 5% v/v.

Add OptiFit Complete first to the agitating tank. For use with herbicides (including desiccants), insecticides and fungicides.

Prior to use, read all chemical label directions and the directions on this label. OptiFit Complete is not intended as a substitute for good agronomic practices, and sound application techniques must be used when spraying.

This product has demonstrated excellent plant safety, but not all species and varieties have been tested. Before treating a large area, treat a small area and observe prior to full scale application.

Storage: store in a well-ventilated place. Keep container tightly closed.

Specifications

Principal functioning agents

APE and NPE free. All ingredients are exempt from tolerance requirements under 40 CFR 180.1001(d).

Always read and follow label directions.